Airbrush CoCo BROW PRO

Lightweight and Comfortable

Our device is very lightweight and ergonomic, making it comfortable even for long sessions. The wireless design gives you full freedom of movement, making it easier to use and more precise.

Complete Control Over Application

You can adjust the liquid hybrid mixture, allowing you to create different effects – from soft and subtle to bold and vibrant. This versatile tool is great for both experienced professionals and beginners in the Airbrush method. Raise your eyebrow styling standards with our modern airbrush and enjoy perfect results and happy clients every day.

The airbrush kit includes:

1 x airbrush

1 x compressor

1 x plastic dropper/pipette

5 x cleaning brushes

2 x plastic cups (15 ml)

1 x USB-C charging cable

1 x little manual

1 x black box with Logo

Technical Specifications:

* Power: 8W

* 2 setting

* Charging time: 90 minutes

* Battery life: 75 minutes

* Wireless usage

* 20-30 PSI / 1.8 Bar

* 300 grams

* Nozzle 0.3 mm

* Input voltage: 5V/1A

* Airflow: 8-10 l/min

* DC: 6VCharging 5v 1A TYPE C

* 74V 1000MAH

Directions for use:

1. Charge the airbrush for at least 2 hours. Assemble the airbrush, cup, and air compressor according to the instructions provided in the set.

2. The mixing ratio for CoCo Lashes hybrid stain is always 2:1 ratio

3. To prepare the brow stain , pour 12 drops of CoCo Brow Stain and 6 drops of Liquid Activator into a plastic container (note: always pour the developer first, then the color).

4. Close the container with the lid.

5. Turn on the device using the button located at the bottom of the compressor. Press once to set to position 1, press twice to set to position 2.

6. Place your finger or a cotton pad on the nozzle, press the trigger; the device will now turn on.

7. Slowly pull the trigger back to start mixing the dye using the bubble method.

8. The dye will start to bubble slightly. After about 10 seconds, the dye will be well mixed.

9. Press the trigger, slowly pulling it back to start spraying.

10. First, spray a cotton pad to check if the dye has the right thickness and color.

11. After each use, clean the airbrush using the bubble method.

Cleaning an Airbrush

Regular and thorough cleaning of the airbrush is essential to ensure the quality of your work and to prolong the lifespan of the device.

How often should you clean the airbrush?

The airbrush should be cleaned after each use to prevent paint residue from affecting the quality of future work.

Cleaning after each use - Bubble Method

1. Remove excess paint from the plastic cap using a cotton swab.

2. Fill the cap halfway with water, then spray it into a bowl or onto a piece of kitchen paper towel to remove paint residue.

3. Remove the cap , wash it under running water, and then place it back on the airbrush.

4. Fill the plastic cap with water.

5. Place your finger over the nozzle.

6. Press the trigger and slowly pull it back. The water will start to bubble.

7. Allow the water to bubble for 10 seconds, then pour out the water.

8. Repeat this process two more times.

9. Fill the cap with clean water, remove your finger from the nozzle, and spray the water into a bowl or sink.

10. Spray until no more water comes out of the nozzle.

Airbrush Cleaning at the End of the Workday:

1. Flush the airbrush using the bubble technique described above.

2. Remove the plastic cap, needle cap, and nozzle cap. These are the two rings forming the nozzle.

3. Place these parts in a bowl of water.

4. Use the brushes from the kit to clean the airbrush.

5. Very carefully clean the needle, ideally with a microbrush or a cotton swab soaked in alcohol.

6. Take the cap, needle cap, and nozzle cap out of the bowl. Thoroughly clean them with the included brush. Dry all parts with a paper towel.

7. Now you can reassemble everything, and your airbrush will be ready for the next day.