AirBrush Set PRO

With CoCo BROW Hybrid Stain dyes, you can achieve perfect brows in no time. These hybrid dyes feature exceptional intensity and excellent adhesion to the skin, making them stand out among other brow products. They are ideal for clients who desire long-lasting results.

CoCo Brow Stain dyes boast an innovative formula with a rich, nourishing composition, including:

* Organic henna extract (not to be confused with henna pigment) * Aloe extract * Chamomile extract * Rose extract * Amla fruit extract, rich in vitamin C.

CoCo Brow Stain is available in four color variants, allowing for precise selection of the appropriate shade to meet individual needs.

Note: Colors can be mixed to expand the color range.

Available colors:

* Ash Blond: A dark, cool blonde shade

* Brown: A beautiful, natural brown color

* Dark Brown: A cool dark brown shade

* Black: A black color that can be used alone or to darken and cool down mixtures.

Usage Instructions:

1. Charge the airbrush for at least 2 hours. Assemble the airbrush, plastic cup, and air compressor according to the instructions included in the set.

2. The mixing ratio for CoCo Lashes hybrid dyes is always 2:1.

3. To prepare the brow dye, pour 12 drops of CoCo Brow Stain into the plastic container and 6 drops of liquid developer (note: always pour the developer first, then the color).

4. Close the container with the lid.

5. Turn on the device with the button located at the bottom of the compressor. Press once to set position 1, press twice to set position 2.

6. Place your finger or a cotton pad on the nozzle, press the trigger; the device will now turn on.

7. Slowly pull the trigger back to start mixing the dye using the bubbling method.

8. The dye will start to bubble slightly. After about 10 seconds, the dye will be well mixed.

9. Press the trigger, slowly pulling it back to start spraying.

10. First, spray a cotton pad to check if the dye has the right thickness and color.

11. Clean the airbrush after each use using the bubbling technique.

Cleaning the Airbrush

Regular and thorough cleaning of the airbrush is essential to ensure quality work and extend the device's lifespan.

How often to clean the airbrush?

Clean the airbrush after each use to prevent leftover dye from affecting the quality of subsequent work.

Cleaning after each procedure - bubbling method:

1. Remove excess dye from the plastic container using a cotton pad.

2. Pour water into the container halfway, then spray it into a bowl or on a piece of kitchen paper to remove dye residues.

3. Remove the container, wash it under running water, and then place it back on the gun.

4. Fill the container with lukewarm water.

5. Place your finger on the nozzle.

6. Press the trigger and slowly pull it back. The water will start bubbling.

7. Let the water bubble for 10 seconds, then pour out the water.

8. Repeat this process two more times.

9. Fill the container with clean water, remove your finger from the nozzle, and spray the water into a bowl or sink.

10. Spray until no more water comes out of the nozzle.

Thorough cleaning of the airbrush at the end of the workday:

1. Rinse the airbrush using the bubbling technique as described above.

2. Remove the plastic container, needle cover, and nozzle cap. These are the two rings forming the nozzle.

3. Place these parts in a bowl of water.

4. Use the brushes from the set to clean the paint container opening.

5. Very carefully clean the needle, preferably with a microbrush or cotton swab soaked in alcohol.

6. Remove the container, needle cap, and nozzle cap from the bowl. Clean them thoroughly with the provided brush. Dry all parts with a paper tissue.

7. Now you can reassemble everything, and your airbrush will be ready for the next day.